Відео

Looks like fun to build!

Will never understand why Bachmann can't update their HO line to look that nice. One of the reasons I don't buy from them.

Adam is just awesome man.

Tip #1: buy this from us Tip #2: buy this from us Tip #3: buy this from us

1/24 would have been a good start.

1:18 don’t want it too big

What is the best method for attaching the exhaust hose? The exhaust port isn't staying on the hose, and the hose itself isn't staying on the booth long enough to put the hose clamp on...

hello sir and good day to you, is this ship available to buy from your shop, i live in Europe Malta , and how much it cost and shipping. thank Carmel

Can I check that turps works ok as a thinner for enamel paints like Humbrol?

Tamiya have one other range of paints, specifically aimed at their RC range of vehicles, those being specifically for Polycarbonate. What type of paints are those? I think they're usually only in a spray can, as they're aimed at RC vehicles they might be more hard wearing?

Thanks for this walk-through. I remember from 50 years ago when my father introduced me into plastic modelling, we only had Humbrol Enamel - and I did not know of anything else for decades after that. And when I used an airbrush for my first time (doing all my work with real brushes), I only found that this did not work the way I was used to ... but there was no one to explain to me why not.

Great video, the Tamiya acrylic paints are alcohol based though not water based. I'm tempted to stock the AK paints as I'm looking for a decent brush on solution to stock

Thanks for the easy to understand explanation. By the way, the background music is too loud and distracting!

I realize that this is 3 years old or so, but I have to comment on what was said about tamiya's tracks. Some of the rubber tracks are glue together, like he said. However, some are supposed to be melted together with a hot screwdriver or something similar. If it is a child beginner building the kits, they would need adult supervision for that part.

The MASK intro music

Nice one mate and I been to. Melbourne nice place. thanks from across the ditch👍🇳🇿

Just bought the vegito because it's almost in scale with figuarts, and I ain't dropping 200 on figuarts vegito

I have the VQ Models L4A Grasshopper 46-62 /EP U.S.D Day, 1618mm WS, 5Ch RC I’m new to this and need safe mode what parts do I need and is this unit good for it ??

Up in da club, I am building a track in the VIP section called Sluts and Slots. Its going to be the Ho scale!

Ukraine will win!!!!!!!!!!!!!!!!!!!!!!

Kinda makes me wish i didn't live in Las Vegas! Nice shop.

do you ship in Qatar?

I cant believe I bought an rc without any experience and it was flying everywhere. I even lost a tire within 5 minutes. Great video btw, would have been better if there is another camera zoomed in the transmitter as you do these movements :)

I noticed that you started over with a fresh nub when you introduced a new tool. I always thought you were supposed to cut with the side cutters and get as close as possible then shave off a little with the hobby knife then finish with some light sanding? Am I doing it wrong? Should I be just picking one of those tools for nub removal?

2:25 those Mustangs are Thunderbolts, matey.

it's really hard to get Australian model kits but this one looks really good

Jumping may be “basics” to you but I just wanted to see how the steering works with the wheel on the side of the controller. As someone thinking about getting into the hobby, I’m puzzled why the steering wheel is on the side and not straight on.

I need a left handed rc controller. Where can I get one?

sry mate im into armour

Mustang? odd looking mustang

That’s Horton H. XVIIIA (18A). By the way chaps, waiting awhile on a number of sci-fi kits. Anything coming soon?

Those "mustangs" need to lose some weight.

The coolness factor of that HQ sandman is off the chart!! Been thinking about collecting them

Mustangs?

Do you recommend the 1/350 miniceaft from 2017 parts version? Or go withis larger ones or the newer smaller ones?

the delta 2!!! 🤯😍🔥💪

Wheres my bloddy VN SS model. Its been 3+years since pre ordering!😫😫😫

I couldn't help but laugh at this guys stupid choice of tools after the blade. A BIG ASS FILE?! HELL NO! Use a sanding stick it gets the job done better and safer for the part. Use 100 or 400 grit for the final touch after the craft blade. After that go to 800 grit, 2000, 3000, then buffer sticks to give a shiny finish. NEVER USE A FILE

Bra your intro too long figured it out before you finish your intro

Thanks a very helpful demo on AK, cheers Liam

this is not usefull ate all i buyed it but i cannot

The Wesser P1003/1 is not something I expected to see in conventional, injection molded kit form! The first I heard of this Paleo-VTOL project was in a 2006 book by Zack Parsons titled, "My Tank Is Fight!" Mr. Parsons devoted an entire chapter to this questionable project in his book, where it was envisioned as a transport for elite troops. I suspect we'll be seeing a lot of these built-up at contests - on their own, and in dioramas - in the not too distant future . . . . 76th Like.

Nice. What a pity I don't run on30.

Awesome mate.. thanks from across the ditch 👍✈️🇳🇿

If I purchase a 1/35 scale Kidult in Night Hawk from this Kitty Hawk company and assemble and paint it, I will install two fuel tanks on the left and right outside the fuselage! The interior instrument panel will be printed with decal paper and attached to the digital LED instrument panel, and the exterior color will be painted in Korean "119 Helicopter" with red and yellow stripes "[lace expression]" on a white background, and we plan to completely remodel it! 2:39

For dry decals i let my thumbnail grow abit and use that it works

i dont think those are real touch but rather pour type. real touch markers have white barrels and a marker tip on each end.

It has no way to auto adjust the elevator with Flaps. Crash inducing.

This my first drift car but I dint like the fact the parts are absolutely impossible to source, so not really worth to buy. Driving wise its pretty easy to drift since the rear are full lock. But you could do the same with real rear differential by using higher viscosity diff oil. Overall I don’t recommend E4D, the biggest problem is real diff cups are plastic and they tends to break or worn out. If u want to swap with after market rear diff you gotta spend like 80usd for one, which is ridiculous!

What should I do if the nozzle wont unscrew? Ive tried with a different airbrush, and I ended up unscrewing the nozzle too hard and it broke in half, with half of it stuck in the airbrush body.